Our jeans buttons and rivets is made of copper alloy material. Copper has better rolling process ability, while pure copper is softer, and the utensils made are easy to bend and deform, so it is often fused with other metals to form copper alloys. Copper
This LB-82 folding box is made of corn starch. It is waterproof and oily, degradable, environmentally friendly and affordable. Welcome to inquire or purchase
We are doing 4 axis cnc machining communication die casting. Material is Alsi12, ADC12,Alsi9cu3,A380 etc. All the parts have very strict quality requirement. Our parts have low porosity but high mechanical performance. Our final customer usually is Nokia,
● Lead-free, approved for potable water ● Standards: NSF/ANSI 61; NSF/ANSI 372 ● Connections are made in four to seven seconds and ensures a consistent, strong, reliable, watertight seal● Eliminates need for tanks, hoses, thread cutters, solder and flux
Specifications:UCMSL500 UCMSL600 UCMSL700 UCMSL800 UCMSL900 UCMSL1000Working angle at increment of 5,from 0 to 60.Easy to adjust bottom due to spring can be removed from back.Mounting width are from 500 to 1000mm.
Collapsible plastic box pallets are available in 1000mm in height. They are in excellent lightly used condition, clean with no stickers, all doors and hinges are intact.
Diantai's proven pressure seal design.Diantai flexible wedge offers superior tightness of seats and freedom from sticking.Wedge guiding minimizes seat rubbing and scuffing resulting in long cycle life.
Drywall anchor screws is one piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and zamac alloy for use with either a No.6 or No.8 screws in 3/8” to 1” wallboard. The drywa
It equipped with a side document pocket, a tablet sleeve, a cellphone pouch, a receipts pocket, 3 card holders, a pencil holder and a earphone organizer as well as a Clipboard.
The impact crusher is designed as a three-chamber crushing zone. It can crush all kinds of coarse, medium and fine materials with compressive strength not exceeding 350Mpa and side length of 100-400mm. The crushing ratio is large, and the finished product