316 stainless steel, 18cr-12ni-2.5 Mo due to the addition of Mo, so its corrosion resistance, atmospheric corrosion resistance and high temperature strength is particularly good, can be used in caustic conditions.
High Temperature Resistance Molybdenum Welded BoatWidly used in vacuum furnace, evaporation, thin flim coating and MIM applicationWe can produce as requested drawing or design
●Pallets can be located, accessed and moved individually. ●Rapid handling almost all types of palletized goods ●Fully utilize vertical space. ●The loading capacity per level of such rack may reach 5000kg. Strength and rigidity prevents compression damage
Neodymium Cylinder Magnets are ideal for applications requiring the embedding of magnets with more than average length, e.g. acrylic signage, picture frames, joinery.
RBSiC Cross Beam introduction This is reaction-bonded (silicon infiltrated) silicon carbide, being formed zero porosity by filling up open porosity with silicon metal (Si). Because of it's zero porosity characteristic, thermal conductivity is more tha
Silica brick is made of silicon as raw material and fired at high temperature. The silicon oxide content is more than 93%. It is used in hot air furnace, coke oven, glass kiln, etc. It has good resistance to acid slag corrosion, and the load softening tem
Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set
Rapid market response: Our company, as a manufacturer, can directly contact our customers, after informed of regular specifications/standard sizes from our customers, we can make inventory in advance.
EMT 90 degree elbow is applied with UL standard, and is used to change the directions of conduit and wire route for 90 angle. It can be installed either exposed or concealed. This EMT 90 degree elbow is made of unthreaded galvanized steel for effective co
The frame of semi-trailer is of through beam structure, and the longitudinal beam is of straight or gooseneck type. The suspension adopts the non independent steel plate stamping type rigid suspension (optional air suspension)
The magnetized direction is always through axial, but some customers use it to assemble their sensor, then the magnetized direction is through the diametral.
Electrical Metallic Tubing (EMT) is applied with ANSI C80.3-1983 UL797, is designed to protect and route cables and conductors. It can be installed either exposed or concealed. This EMT conduit is made of unthreaded galvanized steel and has an organic coa